Huide Backpacks Manufacturers are specialized in designing,producing and exporting all kinds of bags & custom backpack, wholesale backpack.

    •  

A Brief Analysis of Terminology in the Process of Luggage Making

by:Huide     2021-06-25
Luggage is widely used in life, and cannot be ignored in the gift industry. People's endless love for luggage is not only because of its beauty, but also because of its practicality. Many companies custom-made luggage will contact the luggage manufacturers directly. When we communicate with the manufacturers about the customization of luggage, it is best to know some luggage production terms to facilitate a pleasant dialogue with the manufacturers. Let’s learn about the terminology in the luggage production process. .   1. Seam: The seam process is to combine two main materials together, which is the first step of the synthesis process of a bag. Generally speaking, the seam does not include the zipper and trademark materials to the fabric, this should be paid attention to. Ordinary backpacks are stitched together only once, that is, one stitch. Some customers of mountaineering bags will require the seam to be double stitched to increase the firmness.   2. Broken thread: It is inevitable that there will be broken thread where there is a seam. If there is a broken thread during production, the customer will ask to pour 1 inch and continue sewing to avoid thread throwing. So if there is a disconnection and there are more lines, you have to go twice, and customers can also pay attention to check when checking the luggage. Generally speaking, the invisible place, that is, the seam inside the bag, is allowed to be broken, but the open thread on the outside of the bag is not allowed to be broken.  3. Up and down thread: Cloth and leather bags are sewn with a sewing machine. This kind of sewing machine has the same principle as a household sewing machine, with one upper thread and one lower thread. The tightness of the upper and lower lines should be adapted to each other, not one loose and one tight. If the tightness is not the same, there will be a nose pull phenomenon, that is, the suture has a small thread buckle. This is not allowed to appear bad.  4. Needle size: Needle size is the density of stitching stitches. It is generally expressed by 1 inch (2.54 cm) needles. Generally, the stitch size of backpacks is 1 inch 8 stitches, and the backpacks of famous brands such as Jansport, Eastpak, Trans, REI, etc. also stipulate the same. But there are also requirements for smaller stitches. Dana's bag under K2 requires 1 inch 9 stitches. Generally speaking, 1 inch 8-9 needle is more suitable. If it is less than 8 stitches, it is not very good for mountaineering bags.   5. Thread end: Thread end is the thread wool left after sewing. Some customers have very strict requirements on thread ends, and they hate thread ends very much. They stipulate that if the thread end is longer than 3MM, it is bad! Therefore, basically the factory will clean the thread end, that is, cut off the excess thread with scissors and bake it with fire. Customers can also pay attention to this detail when inspecting their bags.
need huge investment, so it is important to shop with caution.
Quanzhou Huide Bags Co.,Ltd supports these goals with a corporate philosophy of adhering to the highest ethical conduct in all its business dealings, treatment of its employees, and social and environmental policies.
Although there are various available in the market (such as backpack manufacturers, wholesale backpack, and backpack manufacturers), recent study results have made this wholesale backpack custom backpack manufacturers a preferred custom backpack manufacturers choice of the people.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...